7.4V 1300mAh XH-3P Lithium Battery Charging Cable

Strong Versatility: The FXT WORKS cable is suitable to connect most adapters and 7.4V (three-pin) 18650 lithium battery (Output Port: 3-pin | Input Port: Type-A). When the output terminal of the cable and input terminal of the battery are the same, and the adapter adapts USB Type-C, such as phone chargers.

1.3A Fast Charging: Our cable supports a high current of 1300 mAh, which can greatly reduce the charging time of the battery with the 5V 2A adapter.

Overcharge and Over-voltage Protection: The cable is equipped with a built-in smart chip to prevent excessive current and voltage from entering and protect the equipment and battery from damage.

Input: 5.0V 1-2A

Output: 7.4V 1300mA

Product Weight: 19g

Length of Charging Cable: 1.85ft (including the plug)

Charging Hour Approximately = Battery Capacity (mAh) × 1.1 ÷ Output Electric Current (mA)

Attention:

1. Charging a non-lithium battery may cause the charging cable to smoke, heat, or burn. The output voltage of the charging cable must be the same as the input voltage of the battery. Please use the charger with the appropriate current of 2A.

2. The metal pin in the plug will be damaged by a short circuit or heavyweight.

3. When the charging cable is not in use, it should be removed from the charger and stored in a cool place to prevent moisture and sun exposure.

4. The cable can be connected with the mobile power, the mobile phone adapter, and the USB interface of the computer device for charging.

5. The purchase of the charging cable is deemed to have agreed with the above point of view. The user shall bear the responsibility for the violation of safe operation and use. Error measuring is unavoidable.